Product

No.258 IMPACT TESTER

This pendulum type impact tester for plastic enables the operator to conduct both Charpy and Izod impact test just by changing the hammer and the anvil. Also, the Tensile impact test can be conducted on this tester. The tester can be attached with an optical rotary encoder, so that the impact data can be saved in a computer.

PRODUCTS SPECIFICATION

Test methodCharpy Impact TesterIzod Impact Tester
Reference standardsJIS-K7111, ISO-179, ASTM-D6110JIS-K7110, ISO-180, ASTM-D256
Capacity0.5, 1, 2, 4, 5, 7.5, 15, 25 J1, 2.75, 5.5, 11, 22 J
Lift-up angle150°150°
Impact speed (m/s)*2.9, 3.8 (3.46)3.5 (3.46)
Striking Edge Angle*30 ± 1° (45 ± 2°)75° (-)
Striking Edge Radius (mm)*R2 ± 0.5 (R3.17 ± 0.12)R0.8 (R0.79 ± 0.12)
Anvil-Edge Distance (mm)*22 ± 0.2 (22 ± 0.05)
Support Length (mm)*62 + 0.5 (101.6 ± 0.5)
AccessoriesSpecimen setting gauge, Block gauge, Torque wrench (Izod only)Specimen setting gauge, Block gauge, Torque wrench (Izod only)
OptionSoftware, Safety Cover, Hammer Release Device, Curtain for Litter ControlSoftware, Safety Cover, Hammer Release Device, Curtain for Litter Control
Power SourceAC 100 V, 1-Phase, 3 A, 50/60 HzAC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions/ Weight (Approx.)W550 × D350 × H850 mm, 100 kgW550 × D350 × H850 mm, 100 kg

We provide Best service
to the customers

Modern Technology

Because of the modern technology,our technology environment became to the higher level.Like usage of the modern technique of the equipment and the machines made us modernly prepared.

Certified Products

Our products and brands which we are using for the costumer needs and the satisfaction is fully certified products from the best company which could be later approved for the sales.

Success Of Products

Because of using the successful certified products is the reason for the success of our company brand and the products.

    Get a Quote Now

    Do you need any Help ?

    X