Product

No.210 MAGNET WIRE ABRASION TESTER

This tester is to evaluate the abrasion resistance of enamel wire according to the blade reciprocating method. Abrading the enamel wire back and forth with constant load, the operator is to check the number of reciprocates until the conduction occurs. By turning the test specimen, one test specimen can be tested 3 to 4 times.

※No.210-ISO6722 WIRE ABRASION TESTER

This version is compatible with specimens with a cross-section under 6 mm2.

PRODUCTS SPECIFICATION

ModelNo.210(NEMA)No.210-ISO6722 (JASO、ISO)
Abrading Distance10 mm15.5 ± 1 mm(Displacement of Needle 20 ± 1 mm)
Abrading Speed60 times/min55 ± 5 times/min
Specimen ClampDistance 71 mm
(Left-Right 35.5 mm from Abrasive Center)
Weight LoadInitial 2 N to Max. 10 NInitial 2 N to Max. 10 N
(Standard: 7 ± 0.05 N)
Abrading Bladeφ0.4 mmφ0.45 ± 0.01 mm (JASO)
Counter6 Digits Preset Counter6 Digits Preset Counter
Specimen Rotating Angle0°, 120°, 240°0°, 90°, 180° and 270°
OptionSafety CoverSafety Cover
Power SourceAC 100 V, 1-Phase, 5 A, 50/60 HzAC 100 V, 1-Phase, 5 A, 50/60 Hz
Dimensions/ Weight (Approx.)W480 × D450 × H575 mm, 34 kgW480 × D450 × H575 mm, 34 kg

We provide Best service
to the customers

Modern Technology

Because of the modern technology,our technology environment became to the higher level.Like usage of the modern technique of the equipment and the machines made us modernly prepared.

Certified Products

Our products and brands which we are using for the costumer needs and the satisfaction is fully certified products from the best company which could be later approved for the sales.

Success Of Products

Because of using the successful certified products is the reason for the success of our company brand and the products.

Get a Quote Now

Do you need any Help ?

X