Product

No.216 UNIVERSAL MATERIAL TESTER

This universal tensile elongation/ compression tester (Auto Strain/ Strograph) is best suited for plastic and rubber. The tester capacity comes in either a maximum of 5 kN or 10 kN respectively. The test specimen is attached to chucks on both ends and is applied elongation/ compression force continuously through loadcell until breakage. Tester control and tensile strength calculation are both conducted via touch panel interface.

PRODUCTS SPECIFICATION

ModelNo.216-5kN
UNIVERSAL MATERIAL TESTER
No.216-10kN
UNIVERSAL MATERIAL TESTER
Test LoadMax. 5 kNMax. 10 kN
Stroke1,000 mm*1,000 mm*
Test Speed1 to 1,000 mm/min1 to 500 mm/min
AccessoryChuck shapes are to be consulted.Chuck shapes are to be consulted.
OptionsCSV Export Software, Extensometer
(Stroke: 50 to 500 mm, Accuracy: ± 0.5 mm)
CSV Export Software, Extensometer
(Stroke: 50 to 500 mm, Accuracy: ± 0.5 mm)
Power SourceAC 100 V, 1-Phase, 10 A, 50/60 HzAC 100 V, 1-Phase, 10 A, 50/60 Hz
Dimensions/ Weight (Approx.)W550 × D700 × H1,630 mm, 130 kgW730 × D750 × H1,560 mm, 180 kg

* The Chucks/ Loadcell length is not included.

We provide Best service
to the customers

Modern Technology

Because of the modern technology,our technology environment became to the higher level.Like usage of the modern technique of the equipment and the machines made us modernly prepared.

Certified Products

Our products and brands which we are using for the costumer needs and the satisfaction is fully certified products from the best company which could be later approved for the sales.

Success Of Products

Because of using the successful certified products is the reason for the success of our company brand and the products.

Get a Quote Now

Do you need any Help ?

X