Product

No.404 MULLEN TYPE BURSTING STRENGTH TESTER FOR TEXTILE

This tester is used to evaluate the bursting strength of textile according to the Mullen’s method. The operator is to tighten the test specimen to the tightening board and pressurize it with a rubber membrane mediator. The maximum pressure when the test specimen bursts subtracted by the strength of the rubber membrane will be the bursting strength of the test specimen.

PRODUCTS SPECIFICATION

Specimen150 × 150 mm
ClampUpper φ30.48 ± 0.03 mm
Lower φ30.50 + 0.25 mm
Upper and Lower both with 60°V Groove
Pressing Speed98 ± 4 ml/min
Pressure GaugeChoose 2 kinds (0.3, 0.6, 1.4, 2.0, 4.5 and 7.0 MPa)
AccessoriesRubber Membrane: 10 pcs, Membrane Height Gauge, Fixing Tool
OptionDigital Pressure Gauge, Pneumatic Clamp Spec (YPO)
Power SourceAC 100 V, 1-Phase, 10 A, 50/60 Hz
Dimensions/ Weight (Approx.)W400 × D400 × H850 mm, 80 kg
W400 × D500 × H560 mm, 85 kg (YPO)

We provide Best service
to the customers

Modern Technology

Because of the modern technology,our technology environment became to the higher level.Like usage of the modern technique of the equipment and the machines made us modernly prepared.

Certified Products

Our products and brands which we are using for the costumer needs and the satisfaction is fully certified products from the best company which could be later approved for the sales.

Success Of Products

Because of using the successful certified products is the reason for the success of our company brand and the products.

    Get a Quote Now

    Do you need any Help ?

    X