Product

No.553 PENCIL SCRATCH HARDNESS TESTER (MANUAL)

This tester is used to evaluate the hardness of coated film according to the testing machine method. Scratching the paint surface with a pencil attached at a 45° angle, the operator is to determine the hardest pencil that does not tear or damage the coated film. The tester can also be used to evaluate the hardness of decorative sheet and resistance to solvents on enameled wire.

PRODUCTS SPECIFICATION

ModelNo.553PENCIL SCRATCH HARDNESS TESTER (MANUAL)No.553-MPENCIL SCRATCH HARDNESS TESTER (ELECTRIC SYSTEM)
Specimen Base100 × 180 mmM-1: 100 × 180 mmM-2: 150 × 180 mm
StrokeLeft-Right Max. 100 mm, Front-Back Max. 50 mmLeft-Right Max. 100 mm, Front-Back Max. 50 mm
Scratching Angle45° (60° for Enameled Wire)45° (60° for Enameled Wire)
Scratching SpeedManual 1.75 mm/ 1 turnMotorized (Standard 0.5 to 1 mm/s)
Weight LoadMax. 1 kgf (Balance Weight)Max. 1 kgf (Balance Weight)
AccessoriesMitsubishi UNI Pencil (6B to 9H): Total 10 pcs, Abrasive Paper (#400), Spirit LevelMitsubishi UNI Pencil (6B to 9H): Total 10 pcs, Abrasive Paper (#400), Spirit Level
OptionHeating Plate Spec, Conduction Device, Needle (φ3 mm, L23 mm, Top Angle 60°)Heating Plate Spec, Conduction Device, Needle (φ3 mm, L23 mm, Top Angle 60°)
Power SourceAC 100 V, 1-Phase, 3 A, 50/60 Hz
Dimensions/Weight (Approx.)W500 × D170 × H370 mm, 8 kgM-1:W440 × D200 × H440 mm, 23 kgM-2:W440 × D260 × H440 mm, 30 kg

We provide Best service
to the customers

Modern Technology

Because of the modern technology,our technology environment became to the higher level.Like usage of the modern technique of the equipment and the machines made us modernly prepared.

Certified Products

Our products and brands which we are using for the costumer needs and the satisfaction is fully certified products from the best company which could be later approved for the sales.

Success Of Products

Because of using the successful certified products is the reason for the success of our company brand and the products.

    Get a Quote Now

    Do you need any Help ?

    X